Cannot Connect Tablo DVR to TP-Link Extender? What to Do?
Did you recently purchase a Tablo DVR, tried to connect it to the TP-Link wireless range extender, but fell on your face front while trying to do so? Well, worry not. This issue is faced by many users these days. We have helped most of them to connect Tablo DVR to the TP-Link extender with ease, we can help you too. Given this, you should go through some basic troubleshooting techniques found in this blog post. Before you proceed, make sure that you try every solution. Do not get de-motivated if the initial few of them do not work for you. Remind yourself that there are still more to go, and read on.
How to Connect Tablo DVR to TP-Link Extender Hassle-Free?
i. Try to Reboot the Tablo DVR
Sometimes, a simple reboot of the Tablo device is enough to resolve many minor problems related to it. Taking this into consideration, this should be your first troubleshooting step to resolve the issue in discussion. To reboot Tablo DVR, you need to unplug the power cord which is connected into the port called power, and wait for more than a minute. Once you feel that you have given the device enough time to rest, it is recommended that you plug the power cord back into its place. Once done, check whether you are able to connect Tablo DVR to the TP-Link wireless range extender.
ii. Restart the TP-Link Extender
Given this troubleshooting solution has caught your attention; it means that the same godforsaken issue is behind your back. To ensure that it hops off in no time, this time you should try to reboot or restart your TP-Link extender. Executing the process is as easy as it seems. You just need to press and hold the power button. Once done, mentally count from one to ten, and then, press the same button to turn on the device. Now, wait for the LED light to become solid. It is important for the light to become stable as it serves as an indication that the device is getting an adequate power supply.
iii. Check the Ethernet Cable in Use
Another reason that could have stopped you to connect Tablo DVR to the TP Link extender issue is that the Ethernet cable which you used to connect the devices is not in a good condition, either it is worn out or damaged. Worry not. Ethernet cable can get worn out over time. The reason why it could have gotten damaged is because your pet, if you have one at home, likes to chew things unnecessarily. Whatever the reason behind the poor condition of the Ethernet cable is, it is recommended that you get rid of the existing cable with a new one. For this, you ought to step out of your house.
iv. Reset the TP-Link WiFi Extender
Despite trying your luck at all the solutions presented above, if you still cannot connect Tablo DVR to the TP Link extender, then perhaps, there is something wrong with the extender itself. In that scenario, you ought to get it replaced. What is that? Are you not keen on doing this? No issue. Resetting the extender can also work for you. Thus, restore your device to its default factory mode. For this, you ought to make use of the reset button found on the extender. As soon as the process comes to an end, use the default TP Link login credentials to set it up from the very beginning.
As mentioned earlier, many people have been trying to get rid of the Tablo DVR not connecting to the TP Link extender issue on their own, but very have succeeded. This blog is for the remaining lot that failed to resolve the same. We are expecting that now you will be able to connect Tablo DVR to the extender installed in your home. On the off chance, you still have got no luck, you are left to do the thing which you were most afraid of, i.e. opting for another extender model. Wondering which is one of the best TP-Link extenders? Well, to gain info about this, you should not waste any more time going to the official website.