How to Connect TP-Link Extender to Host Router?
If you’ve been struggling with WiFi dead zones in your home, a TP-Link extender can come to your rescue! This networking device work like a WiFi booster, helping you spread your home network signals to hard-to-reach corners. If you are unaware of the process of how to connect TP-Link extender to the host router, then worry not. In this blog, we’ll walk you through the step-by-step process of TP Link Extender Setup. Keep reading!
Before we proceed further we would like you to gather some important types of equipments for the process that you need. Getting all the requirements ready will make things easy for you.
The requirement to Connect the TP-Link extender to Router
Here we make a list that contains all the important things that you require to connect TP-Link extender to the host router:
- A stable and reliable internet connection from the internet service provider.
- Working wall outlet which gives the sufficient power supply.
- Good quality Ethernet cable.
- A device like a laptop, computer, or mobile.
- Updated internet browser.
- Default web or IP address of the device.
- Admin details (username & password).
Thus, these were the things that you need to get prepared before performing the installation process. Once you have all the things at hand, you can proceed further.
Instructions to Connect TP-Link Extender to Router
Step 1: Placement of Extender
- First, look for the optimal location for the extender near the host router.
- The place should be dust free and have a working wall outlet.
- Make sure metal objects and electronic gadgets are not installed near the device.
Step 2: Power On Extender
- Now plug the extender into the working wall outlet.
- Press the power button to turn on the device.
- Wait for some time until the device is powered on.
- Once the device is booted up properly, then you can proceed further.
Step 3: Connect the Computer to Extender Network
- Power on your computer and go to your WiFi settings.
- You’ll see a list of available networks.
- Look for one that has your extender’s name or model number.
- Click on it to connect.
Step 4: Open Web Browser
- Once connected to the extender’s network, launch the internet browser for the further process.
- The internet browser should be running on its updated version.
- You can use any popular internet browser such as Chrome or Firefox.
Step 5: Access Default IP or Web Address
- Type the default web address of the TP-Link extender into the URL bar.
- Avoid making typing errors otherwise, you may redirect to the wrong page.
- Press the Enter key to reach the login portal.
Step 6: Log In to Extender
- Now you will see the extender login portal.
- Fill in the username and password in the on-screen fields.
- Click on the Log In button.
Step 7: Connect TP-Link Extender to Router
- You should now see the TP-Link extender’s setup page.
- Choose your language and click “Next” or “Continue.”
- The extender will scan for available WiFi networks.
- Select your host router’s network from the list and click “Next.”
- Enter your WiFi password for the host network.
- Click “Next” to review your settings. If everything looks good, click “Finish” or “Save.”
Step 8: Wait for the Extender to Reboot
After saving your settings, the extender will restart. This can take a minute or two. Once it’s done, you’ll likely see a message saying your extender is now connected to your router.
Congratulations, you successfully connect TP-Link extender to the host router, and now you will get better WiFi coverage in pesky dead zones. Enjoy your improved internet experience!
Now you know very well what you need to do to connect TP-Link extender to the router. Once you get all the things ready then, perform the above-mentioned 8 steps to configure your device in no time.